Quantum spin Hall effect in bound states in continuum

Moving the polarization of the incident wave along a meridian of the Poincaré sphere, experimentally we show that the coupling with the fundamental Bloch's surface waves of the mode, provide a spatially coherent, macroscopic spinmomentum locked propagation along the symmetry axes of the PhCM. This novel mechanism of light-spin manipulation enables a versatile implementation of spin-optical structures that may pave the way to novel strategies for light spin technology and photonic multiplatform implementations

Photon recycling in Fabry-Perot micro-cavities based on Si3_3N4_4 waveguides

We present a numerical analysis and preliminary experimental results on one-dimensional Fabry-Perot micro-cavities in Si$_3$N$_4$ waveguides. The Fabry-Perot micro-cavities are formed by two distributed Bragg reflectors separated by a straight portion of waveguide. The Bragg reflectors are composed by a few air slits produced within the Si$_3$N$_4$ waveguides. In order to increase the quality factor of the micro-cavities, we have minimized, with a multiparametric optimization tool, the insertion loss of the reflectors by varying the length of their first periods (those facing the cavity). To explain the simulation results the coupling of the fundamental waveguide mode with radiative modes in the Fabry-Perot micro-cavities is needed. This effect is described as a recycling of radiative modes in the waveguide. To support the modelling, preliminary experimental results of micro-cavities in Si$_3$N$_4$ waveguides realized with Focused Ion Beam technique are reported.Comment: 5 pages, 5 figure

Plasmonic lenses for tunable ultrafast electron emitters at the nanoscale

Simultaneous spatiotemporal confinement of energetic electron pulses to femtosecond and nanometer scales is a topic of great interest in the scientific community, given the potential impact of such developments across a wide spectrum of scientific and industrial applications. For example, in ultrafast electron scattering, nanoscale probes would enable accurate maps of structural dynamics in materials with nanoscale heterogeneity, thereby leading to an understanding of the role of boundaries and defects on macroscopic properties. On the other hand, advances in this field are mostly limited by the brightness and size of the electron source. We present the design, fabrication, and optical characterization of bullseye plasmonic lenses for next-generation ultrafast electron sources. Using electromagnetic simulations, we examine how the interplay between light-plasmon coupling, plasmon propagation, dispersion, and resonance governs the properties of the photoemitted electron pulse. We also illustrate how the pulse duration and strength can be tuned by geometric design and predict that sub-10-fs pulses with nanoscale diameter can be achieved. We then fabricate lenses in gold films and characterize their plasmonic properties using cathodoluminescence spectromicroscopy, demonstrating suitable plasmonic behavior for ultrafast nanoscale photoemission

Balancing ion parameters and fluorocarbon chemical reactants for SiO2 pattern transfer control using fluorocarbon-based atomic layer etching

In manufacturing, etch profiles play a significant role in device patterning. Here, the authors present a study of the evolution of etch profiles of nanopatterned silicon oxide using a chromium hard mask and a CHF3/Ar atomic layer etching in a conventional inductively coupled plasma tool. The authors show the effect of substrate electrode temperature, chamber pressure, and electrode forward power on the etch profile evolution of nanopatterned silicon oxide. Chamber pressure has an especially significant role, with lower pressure leading to lower etch rates and higher pattern fidelity. The authors also find that at higher electrode forward power, the physical component of etching increases and more anisotropic etching is achieved. By carefully tuning the process parameters, the authors are able to find the best conditions to achieve aspect-ratio independent etching and high fidelity patterning, with an average sidewall angle of 87° ± 1.5° and undercut values as low as 3.7 ± 0.5% for five trench sizes ranging from 150 to 30 nm. Furthermore, they provide some guidelines to understand the impact of plasma parameters on plasma ion distribution and thus on the atomic layer etching process

The many pros and the few cons of noninvasive ventilation in ordinary wards

n/

Detection of low energy single ion impacts in micron scale transistors at room temperature

We report the detection of single ion impacts through monitoring of changes in the source-drain currents of field effect transistors (FET) at room temperature. Implant apertures are formed in the interlayer dielectrics and gate electrodes of planar, micro-scale FETs by electron beam assisted etching. FET currents increase due to the generation of positively charged defects in gate oxides when ions (121Sb12+, 14+, Xe6+; 50 to 70 keV) impinge into channel regions. Implant damage is repaired by rapid thermal annealing, enabling iterative cycles of device doping and electrical characterization for development of single atom devices and studies of dopant fluctuation effects

Effect of cyclic loading on hydrogen diffusion in low carbon steels

Carbon steels or low-alloyed steels may be affected by damaging phenomena due to Hydrogen Embrittlement (HE), which is a particular form of Environmental Assisted Cracking (EAC). The insurgence of HE depends on the intrinsic susceptibility of the steel, the applied stress, and the concentration of hydrogen inside the metal. It occurs by a mechanism of absorption and subsequent diffusion of atomic hydrogen through the metal lattice. On steels with a yield strength lower than 700 MPa, HE occurs in the plastic deformation field, in the presence of dynamic loading at slow strain rates or cyclic fatigue loading at very low frequencies. Although several important studies were carried out on the effect of loading conditions on hydrogen diffusion into the metal and HE mechanism, HE phenomena are not fully understood. In this work, the effect of the application of cyclic loads on hydrogen diffusion parameters was studied both in the elastic and in the plastic deformation field. The influence of mean load and amplitude was analyzed. Hydrogen permeation tests were performed on API 5L X65 steel, in accordance with ISO 17081:2014. The specimen behaved as bi-electrode between the two compartments of a Devanathan-Stachurski cell. The anodic side of the specimen was polarized at +340 mV vs Ag/AgCl in a 0.1 M NaOH aerated solution, while the cathodic compartment was filled with an aerated borate solution. A controller enabled temperature adjustment at 20±0.5°C. Once the passivity current registered in the anodic side reached values of 0.05 µA/cm2, a cathodic current density of 0.50 mA/cm2 was applied to charging cathodic side. The study included tests with sine waveform cycling loading, with a maximum level equal to 110% TYS, at a frequency of 10-2 Hz. The results confirmed the values of hydrogen diffusion coefficient usually indicated for low-alloyed steels with a sorbitic microstructure. Strain hardened specimens - stretched above yield strength - showed an increase of steady state current and an extension of the time lag, denoting a slight decrease in the apparent hydrogen diffusion coefficient due to traps effect in the cold deformed steel matrix. Under cyclic loading, an instantaneous peak of current with a subsequent significant transient decrease occurred after cyclic load application, whereas no relevant variation of permeation curve compared to unloaded specimens was observed if specimens were already loaded before hydrogen charging. The instantaneous current peak reached values much higher than the steady state current. This is ascribed to the rupture of the passive film – caused by loading – and its subsequent reformation; in fact, this can also be noted during tests performed on specimens without hydrogen permeation. The following transient, in which the permeation current decreases below the steady state and then returns to it, denotes a relevant trapping effect that causes the instantaneous reduction of mobile hydrogen concentration in the lattice. This becomes more significant for loads closer and closer to the yield strength, mainly beyond this, and can only be noted at the first loading step. Subsequent unloading and loading step at the same mean value showed no transient in the permeation curren

Chemical Raman Enhancement of Organic Adsorbates on Metal Surfaces

Using a combination of first-principles theory and experiments, we provide a quantitative explanation for chemical contributions to surface-enhanced Raman spectroscopy for a well-studied organic molecule, benzene thiol, chemisorbed on planar Au(111) surfaces. With density functional theory calculations of the static Raman tensor, we demonstrate and quantify a strong mode-dependent modification of benzene thiol Raman spectra by Au substrates. Raman active modes with the largest enhancements result from stronger contributions from Au to their electron-vibron coupling, as quantified through a deformation potential, a well-defined property of each vibrational mode. A straightforward and general analysis is introduced that allows extraction of chemical enhancement from experiments for specific vibrational modes; measured values are in excellent agreement with our calculations.Comment: 5 pages, 4 figures and Supplementary material included as ancillary fil

Computational biology tools in design of an agrochemical against Xyllela fastidiosa.

Xylella fastidiosa is a Gram-negative, non-flagellated bacterium that causes CVC in citrus and Pierce?s disease in grapevines. The CVC affects 40% of the 200 million orange trees in São Paulo state. It colonizes the xylem vessels of the plants, blocking the water and nutrient flows. PilT protein is a part of the motility system and very important for Xyllela pathogenicity and our protein target for drug design. Computational biology tools were used to design the compound able to inhibit the formation of the PilT hexamer, leading to loss of Xyllela pathogenicity. This approach could be employed in the development of new inhibitors against different targets belonging to the same protein family of PilT